660 L Bulk Waste Container, 4-Wheel

At 55.12 in (1400 mm) along the front and 47.05 in (1195 mm) to the lid, it is the first product in this range that is wider than it is high. That keeps the loading edge at a comfortable height while holding nearly three times what a 240 L does.

• 174.4 US gal (660 L)
• 55.12 × 29.33 × 47.05 in (1400 × 745 × 1195 mm)
• 83.78 lb (38 kg)
• 5.7 mm wall · four swivel castors with a foot brake

A note on the dimensions. A figure of 1210 × 1200 × 765 mm is also in circulation, which matches no axis of this container. The datasheet, the drawing and the specification table all agree on the figures above, and those are what we publish.

This size gets specific features that the wheeled bins do not:

• Handles reinforced with steel bar, shared only with the 1100 L.
• UV resistant, so sunlight does not break the polymer down.
• Colour-fast, which matters when a fleet has to still look like a

fleet in five years.

Built to the EN 840-1 and EN 840-6 dimensions and design requirements for mobile waste and recycling containers.

Outdoor use: residential complexes, public roads, workshops, factories and municipal sites.

Eleven sizes, from a bin that goes under a counter to a container a collection vehicle lifts:

• 45 L 1.7 kg, indoor
• 50 L 6 kg, post or wall mounted
• 60 L 3 kg, indoor, pedal option
• 65 L 2.7 kg, indoor
• 100 L 7.9 kg, two wheels, pedal option
• 120 L 8.8 kg, two wheels, pedal option
• 240 L 13.5 kg, two wheels, pedal option
• 360 L 22 kg, two wheels
• 660 L 38 kg, four castors (this one)
• 770 L 46 kg, four castors
• 1100 L 64 kg, four castors

The wall follows the size. 3 mm holds from the 45 L all the way to the 240 L, and then steps up: 5 mm on the 360, 5.7 on the 660, 6 on the 770 and 7 on the 1100. Each figure is the section marked on the drawing for that size.

Rated −4 to +104 °F (−20 to +40 °C), the lower of the two figures in circulation for this bin.

Six standard colours: yellow, dark green, charcoal grey, blue, red and light green, which is the way to separate materials across a site. Printed branding. Dimensions carry a ±5 mm production tolerance.