# 1100 L Bulk Waste Container, 4-Wheel (BW-1100)

- Page: https://drpolysystems.com/product/1100l-bulk-waste-container/
- Category: Bulk Waste Containers
- Supplier: DR Polysystems, North York, ON, Canada. Delivered across Canada and the United States.
- Price: quoted on request within 24 hours (https://drpolysystems.com/request-for-quotation/)
- Datasheet (PDF): https://drpolysystems.com/datasheets/BW-1100.pdf

The 1100 L is the **largest container in this range**, and the one a
municipal round or a large site standardises on.

### Dimensions
- **290.6 US gal (1100 L)**
- **47.24 × 40.75 × 50.39 in (1200 × 1035 × 1280 mm)**
- **141.10 lb (64 kg)**
- **7 mm wall** · four swivel castors with a foot brake

The **7 mm wall** is more than twice the section of the small indoor bins
and is what makes a container this size survive being pushed, tipped and
left out in the weather for years.

**Measure 1360 mm, not 1200.** The 1200 mm above is the body. The drawing
also dimensions **53.54 in (1360 mm) across the lifting trunnions**, which
is the width that has to pass through a gateway or sit in a bin store. The
660 and 770 L publish the trunnion figure as their length; this one does
not, so it is worth reading twice.

**A note on the dimensions.** A figure of 51 kg and 1200 × 1100 × 800 mm
is also in circulation. The datasheet, the drawing and the specification
table all say 64 kg and the dimensions above. **We publish the three that agree.**

### Rated payload
**970.03 lb (440 kg)**, and worth one caveat: it comes from the same set
of figures that is wrong about the weight and the dimensions. It is the
only figure published anywhere and it is consistent with the 240 and 360 L
at 0.4 kg per litre, so we carry it. **Confirm it with us before you plan
a round around it.**

### Built for the street
- **Handles reinforced with steel bar**, shared only with the 660 L.
- **UV resistant**, so sunlight does not break the polymer down.
- **Colour-fast**, so a fleet still matches after years outdoors.

### Design standard
Built to the **EN 840-1 and EN 840-6** dimensions and design requirements
for mobile waste and recycling containers.

### Where it belongs
**Outdoor use**: residential complexes, public roads, workshops, factories
and municipal sites.

### The range, end to end
Eleven sizes, from a bin that goes under a counter to a container a
collection vehicle lifts:

- **45 L** 1.7 kg, indoor
- **50 L** 6 kg, post or wall mounted
- **60 L** 3 kg, indoor, pedal option
- **65 L** 2.7 kg, indoor
- **100 L** 7.9 kg, two wheels, pedal option
- **120 L** 8.8 kg, two wheels, pedal option
- **240 L** 13.5 kg, two wheels, pedal option
- **360 L** 22 kg, two wheels
- **660 L** 38 kg, four castors
- **770 L** 46 kg, four castors
- **1100 L** 64 kg, four castors  **(this one)**

The wall follows the size. **3 mm holds from the 45 L all the way to the
240 L**, and then steps up: **5 mm on the 360**, **5.7 on the 660**,
**6 on the 770** and **7 on the 1100**. Each figure is the section marked
on the drawing for that size.

### Temperature
Rated **−4 to +104 °F (−20 to +40 °C)**, the lower of the two figures in
circulation for this bin.

### Colour and branding
Six standard colours: **yellow, dark green, charcoal grey, blue, red and
light green**. **Printed branding**, taken from the datasheet: this
product's row in the specification table stops three columns early and
never reaches the branding cell. Dimensions carry a **±5 mm production
tolerance**.

## Specifications

- Size: 47.24 × 40.75 × 50.39 in (1200 × 1035 × 1280 mm)
- Material: HDPE
- Net Weight: 141.10 lb (64 kg)
- Temperature Range: −4 to +104 °F (−20 to +40 °C)
- Dimensional Tolerance: ± 5 mm
- Branding: Printed
- Colour: Yellow, dark green, charcoal grey, blue, red or light green
- Resistance: Moisture, ultraviolet light; colour-fast
- Construction: Side lifting trunnions, push handles, handles reinforced with steel bar
- Wash-Down: Washable and suitable for disinfection
- Capacity: 290.6 US gal (1100 L)
- Wall Thickness: 7 mm
- Placement: Outdoor
- Lid: Full-width hinged lid
- Overall Width: 53.54 in (1360 mm) across the lifting trunnions, against the 1200 mm body
- Rated Payload: 970.03 lb (440 kg)
- Wheels: Four swivel castors with a foot brake
- Design Standard: EN 840-1 and EN 840-6

## Questions

**How much does the 1100 L bulk waste container (BW-1100) hold?**
290.6 US gal (1100 L). Rated payload 970.03 lb (440 kg).

**What are the dimensions of the 1100 L bulk waste container (BW-1100)?**
47.24 × 40.75 × 50.39 in (1200 × 1035 × 1280 mm). Dimensional tolerance ± 5 mm.

**How much does the 1100 L bulk waste container (BW-1100) weigh?**
141.10 lb (64 kg) net.

**What wheels and lid does the 1100 L bulk waste container (BW-1100) have?**
Wheels: Four swivel castors with a foot brake. Lid: Full-width hinged lid.

**Which standard is the 1100 L bulk waste container (BW-1100) built to?**
EN 840-1 and EN 840-6.

**What is the 1100 L bulk waste container (BW-1100) made of?**
HDPE. Rated for −4 to +104 °F (−20 to +40 °C). Resistant to moisture, ultraviolet light; colour-fast. Washable and suitable for disinfection.

**Can the 1100 L bulk waste container (BW-1100) be supplied in our colour, with our logo?**
Colours: Yellow, dark green, charcoal grey, blue, red or light green. Logo: printed.

**Is there a datasheet for the 1100 L bulk waste container (BW-1100)?**
Yes. The BW-1100 datasheet is a PDF on this page with the full specification table and the load figures.

**How much does the 1100 L bulk waste container (BW-1100) cost?**
Prices are quoted, not listed, because they depend on volume, build and destination. A written quotation follows within 24 hours, in CAD or USD, shipped from North York, ON.